Every pattern imprinted concrete project has to start from scratch. If you have existing concrete that needs upgrading and enhancing, then we can definitely help.

That’s the position this homeowner in Bury was in.

They had an existing concrete driveway that was still entirely functional and practical – it just didn’t look its best.

The more pressing issue was the pathway around the house. Old flag stones were loose and wobbly, and in the winter, very slippery.

They wanted to replace the concrete flags with a smart-looking printed concrete, knowing from their driveway how versatile and effective pattern imprinted concrete was.

After a visit from our designer Claire, we agreed the print pattern and colour. We also suggested how we could bring the old driveway back to life too with a re-seal, to add extra value to the home transformation project.

Before the project

This was how the old concrete driveway and worn, wobbly concrete flag path looked before we began our work.

During the project

We installed a brand new printed concrete path all around the exterior of the house, with a Royal Ashlar print in a Sandstone Buff colour. We added a chocolate/mahogany release, with stamped brick borders around the edges. We extended the path into the front garden to allow for easier access to the front door too.

We also added anti-slip into the sealant to prevent slippery surfaces during the winter months.

After the project 

As part of the work, we re-sealed the entire front driveway too. Look at the difference it made!